The Primary Objective of this training program is to offer Participants outstanding placement opportunities within iFluids Engineering Group & other Engineering Companies. To achieve this, Participants are required to demonstrate a comprehensive understanding of the subject matter and successfully complete the entire training program, which includes daily Assessments.
By the end of the training, participants will be equipped with the knowledge and skills to effectively contribute to Process team functions, interpret Process Flow Diagrams & Piping and Instrumentation diagrams, Analyze Piping systems, and ensure compliance with industry codes and standards.
What will you Learn?Overview of Oil & Gas Industry
Process Flow Diagrams (PFD)
Piping And Instrumentation Diagrams (P&IDs)
Fundamentals of Piping System
Piping Codes and Standards
Pipe Material Specifications and Manufacturing
Piping Components and Valves
Various Piping Engineering Drawings and Software
Piping Supports
Basic Pipe Stress Analysis Methods
HAZOP Study
Roles and Responsibilities of Piping Engineer
Introduction to ChatGPT and Exploring the Use of AI Tools in Oil and Gas Industry
Effectively Harness the Power of social media for Networking
Target Audience
This Training is Exclusive for all Mechanical Engineers of 2022 & 2023 Batch.
Training Features
Job Oriented Training Program based on Current Industry Demand
Comprehensive coverage of key topics in Piping Design Engineering.
Training Materials & Recordings
Expert Instructors with Industry Serving experience.
Interactive learning methods and engaging sessions.
Industry-relevant examples and Case Studies.
Certificates upon successful completion of Training & Assessments.
Job opportunities for Exceptional performers in Training
ONLINE SESSION
The Training Session will be conducted in Zoom meeting.
The joining link for all training sessions will be shared via email prior to the sessions using the Participants contact email ID furnished at the time of registration
All registered participants are required to complete a Preliminary Online Assessment covering fundamental concepts of Mechanical Engineering and Aptitude . Only participants who achieve a minimum score of 50% in the Preliminary assessment will be eligible to participate in the training program
It's mandatory for all participants to mark their presence in the attendence form shared during the session. Failure to do so will result in being marked absent.
Daily Duration of Training will be 1 Hour hours Additional 30 minutes has been allotted towards doubt clearing session.
All Training module recordings will be uploaded on the iFluids YouTube channel for Participants reference.
Online Assessments & REASSESSMENTS
All Online Assessment questions will be in Multiple-Choice Format (MCQs).
Participants should mandatorily attend daily Assessments Exam for the previous day's module within the suggested time frame.
During Assessments, strict monitoring will be enforced, and any misconduct will lead to disqualification.
Participants must achieve a minimum score of 50% in the daily assessment to qualify the Exams.
If a Participant fails to meet the 50% threshold, they will be given a chance for Reassessment.
Participants can continue attending the entire training modules regardless of the results of the daily assessments
Reassessments shall only be scheduled after the entire training period, allowing Participants spare enough time to prepare.
The Date and Time for Reassessments will be communicated in advance via E-mail
Preliminary Online Assessment Schedule
CERTIFICATES & JOB PLACEMENTS
Participants who have attended and successfully passed all Assessment & Reassessment exam will receive training completion Certificate.
Participants who demonstrate exemplary performance throughout the entire training duration shall have an opportunity for Job Placement in iFluids Engineering.
iFluids Engineering holds ultimate authority over decision- making in all aspects of the training program
The Primary Objective of this training program is to offer participants outstanding placement opportunities within iFluids Engineering Group & other engineering Companies. To achieve this, Participants are required to demonstrate a comprehensive understanding of the subject matter and successfully complete the entire training program, which includes daily Assessments.
Upon successful completion of the Training Modules, Participants will develop a solid foundation in Operations, Processes, Safety Protocols, Risk assessment, and Hazard classification that are specific to Oil and Gas industry. This Ample knowledge will empower them to excel in their future roles, making valuable contributions to the Industry.
What will you Learn?
Overview of Oil & Gas Industry
Process Design Fundamentals
Process Flow Diagram (PFD)
Piping and Instrumentation Diagram (P&ID)
Hazard and Operability Studies (HAZOP)
Quantitative Risk Analysis (QRA)
Functional Safety (Safety Integrity Levels (SIL))
Hazardous Area Classification (HAC) Training
Process Safety Management (PSM)
Soft skills Training
Introduction to ChatGPT and Exploring the Use of AI Tools in Oil and Gas Industry
Effectively Harness the Power of Network by using LinkedIn
Target Audience
This Training is Exclusive for all Chemical, Petrochemical & Petroleum Engineers of 2023 Batch.
Trainers – Brief Profile
Topic
Overview of Oil & Gas Industry
Trainer – Mr Srinivasan V (Senior Consultant – Process Safety Engineering)
Trainer Brief - Mr. Srinivasan V has over 50+ Years of experience in Project Planning, Erection, Pre-commissioning & Commissioning, Unit Start-up & Operations, Training & Development, Audit, Assessment and Quality Assurance in Oil and Gas Industry.
Topic
Process Design Fundamentals
Process Flow Diagram (PFD)
Trainer – Mr. Rajaram U (Lead Process Engineer)
Trainer Brief - Mr. Rajaram U has over 17 years of expertise in Process Safety in the Oil & Gas sector.
Topic
Process Design Fundamentals
Piping and Instrumentation Diagrams (P&ID) -1
Piping and Instrumentation Diagrams (P&ID) -2
Trainer – Mr. Sivakumar K (Lead Process Design Engineer)
Trainer Brief - Mr. Sivakumar K has over 15 years of experience in Oil & Gas Industry, Petroleum Refinery units Commissioning, Operation/Planning, Digitization/Data analysis & LNG Regasification.
Topic
Hazard and Operability Studies (HAZOP)
Trainer – Mr. Nirmal Kumar (Principal Engineer– Process & Technical Safety
Trainer Brief - Mr. Nirmal Kumar has over 17years of expertise in Operations, Project & Commissioning in Oil & Gas sector.
Topic
Quantitative Risk Analysis (QRA)
Trainer – Ms. Pia Judith (Lead Process Safety Engineer)
Trainer Brief - Ms Pia Judith has 13 years of hands-on experience in Fire and Gas Mapping Study, Quantitative Risk Assessment study, HAZOP study, Emergency Response Disaster Management Plan.
Topic
Functional Safety (Safety Integrity Level (SIL)
Trainer – Mr. Sridhar T V (Lead Engineer-Process & Technical Safety)
Trainer Brief - Mr. Sridhar T.V has 24 years of expertise in Oil and Gas. He has 8 years of experience in PDO (Petroleum Development Oman) as Production / HSE Trainer / Competence Assessor
Topic
Hazardous Area Classification (HAC) Training
Trainer – Mr. Vinod (Senior Technical Safety Engineer)
Trainer Brief – He has over 12+ years of experience in fire protection philosophy, HSE & SD Philosophy, HAC, and safety study reports, HAZID, HAZOP, QRA, and Risk-Based Production audits in Oil and Gas Industry
Topic
Process Safety Management (PSM)
Trainer – Mr. K. Godwin Sam. (Lead Engineer – Process & Technical Safety)
Trainer Brief - He has 15 years of expertise in Plant Operations, Process Engineering and Process Safety in the Petro Chemical Industries
Soft Skills Training
Topic
1. Effectively Harness the Power of Network by using LinkedIn
Trainer – Mr. John Kingsley. (Guest Trainer)
Trainer Brief - He has 16 years of expertise in various industry sectors alike Marketing & Technical services
Topic
Introduction to ChatGPT and Exploring the Use of AI Tools in Oil and Gas Industry
Trainer – Mr. Premnath D. (Design & Digital Engineer)
Trainer Brief - He has 10+ years of expertise in Digital Marketing and Graphical Designing serving potential clients across the Globe
Training Features
Job Oriented Training Program based on Current Industry Demand
Comprehensive coverage of key topics in Oil and Gas industry.
Training Materials & Recordings
Expert Instructors with Industry Serving experience.
Interactive learning methods and engaging sessions.
Industry-relevant examples and Case Studies.
Networking with Industry Professionals.
Certificates upon successful completion of Training & Assessments.
Job opportunities for Exceptional performers in Training
Online Training & Assessments
All Online Assessment questions will be in Multiple-Choice Format (MCQs).
All registered Participants shall undergo Preliminary Online Assessment, which shall cover Basic Chemical Engineering Concepts and Aptitude.
Only students who qualify the Preliminary Online Assessment with a minimum of 50% mark shall be eligible to take part in the training
The Training Session will be conducted in Zoom meeting
The joining link for all training sessions will be shared via email prior to the sessions using the Participants contact Email ID furnished at the time of registration
It's mandatory for all participants to mark their presence in the attendance form shared during the session. Failure to do so will result in being marked absent.
Daily Duration of Training will be 1.5 hours Additional 30 minutes allotted towards doubt clearing session
All Training module recordings will be uploaded on the iFluids YouTube channel for Participants future reference.
Participants should mandatorily attend daily assessments for the previous day's module using the provided materials & within the suggested time frame.
Participants who fail to attend the assessment exam should contact the authorities beforehand via email at training@ifluids.in to prevent disqualification.
During Assessments, strict monitoring will be enforced, and any misconduct will lead to disqualification.
Participants must achieve a minimum score of 50% in the daily assessment to qualify the Exams.
If a participant fails to meet the 50% threshold, they will be given a chance for Reassessment.
Participants can continue attending the entire training modules regardless of the results of the daily assessments
Reassessments will only be scheduled after the entire training period, allowing participants enough time to prepare.
The Date and Time for Reassessments will be communicated in advance.
Participants who have attended and successfully passed all assessment & Reassessment exam will receive training completion Certificate.
Participants who demonstrate exemplary performance throughout the entire training duration shall have an opportunity for Job Placement in iFluids Engineering.
iFluids Engineering holds ultimate authority over decision- making in all aspects of the training program.
Preliminary Online Assessment Schedule
SL. No
Date & Day
Topic
Assessment Time
1.
02- June-2023 (Friday)
Preliminary or Qualifying Assessment (Aptitude & Basics of Chemical Engineering)
